Skip to main content

Top 8 Spots to Find Stillwater Trout

The top eight spots for lakes, ponds, and reservoirs

Top 8 Spots to Find Stillwater Trout
To the uninitiated, a lake might just look like a featureless body of water, but your success rate will skyrocket once you learn to understand how the shoreline and bottom contours, the wind, and inflows and outflows affect trout behavior. Photo: Ross Purnell

In a stream, trout are relatively stationary—they find shelter from the current and sit in one position waiting for food to come to them. In lakes, ponds, and reservoirs, trout are constantly on the move, both to find food and keep oxygenated water flowing over their gills.

Stillwater trout do not roam the entire acreage of a lake. They are attracted to food-rich areas to maximize their feeding opportunities and—depending on the season, temperature, and size and depth of the lake—they also collect in the lake strata that are most comfortable for them.

Trout prefer water temperatures between about 52 to 64 degrees F. Brown trout tolerate (and even seek out) slightly warmer temperatures, while brook trout and cutthroat trout do best in cooler temperatures.

Lakes with frequent water temperatures of 70 degrees and above are warmwater lakes, and are most likely home to bass, panfish, and other species.


This temperature range dictates where you will find trout in a lake. In cool climates and at high altitudes, high water temperatures are rarely an issue. For instance, Jurassic Lake is one of the best stillwater trout fisheries in the world, and it’s at the far southern tip of Patagonia. Even in the summer, the ambient temperatures are perfect for trout, so they frequent areas that are best suited for feeding—the shallow areas where sunlight penetrates the water and, through photosynthesis, creates a chain reaction of life that results in giant trout cruising the shallow bays and rocky shorelines.


In high mountain lakes in the Rockies, the trout are locked under ice much of the year, and in the warmest summer months the “warm” shallow edges of a lake may never rise above 50 degrees. These are also stillwaters where the shallows are highly productive.

Even in very warm climates, trout can thrive in stillwaters if there is cold water for them to retreat to. In deep lakes and reservoirs, the surface temperature can be intolerably warm for trout while the water temperature 40 feet below the surface is perfect.

This is because cold water is denser than warm water and stays near the bottom, and because the radiant heating effect of the sun only affects the surface layers. This stratification results in layers of water, with the warmer layers generally on top and the colder layers toward the bottom.

If you are fishing a deep lake with stratified water temperatures, finding the fish during the warm months becomes a depth game. You’ll need a boat, float tube, or pontoon craft to get out over deep water, and a full-sinking line, or a floating line with a long leader and strike indicator to get your weighted nymph or streamer down to where the trout are.


With sinking lines, use the countdown method: Cast as far as you need to reach the bottom and then count “one one-thousand, two two-thousand, three three-thousand” and so on to allow the fly time to sink deep to the colder lake levels where the trout are. Retrieve your fly slowly so the fly travels horizontally through a ­specific depth, and doesn’t rise quickly toward the surface.

Begin with a count to ten, use that for 15 minutes or so, then graduate to a count of 15, and so on. Once you find where the trout are, you can reliably count down to the same depth to catch many more.

Another way to find the bottom quickly, and adjust your fly depth accordingly, is with the help of an electronic depth finder, which also gives water temperature information.


To determine the depth without a depth finder, attach hemostats to your fly and leader and drop the rig off the side of your boat or pontoon. Strip off line until you hit bottom, then mark the depth. With precise knowledge of depth, you can start at bottom and fish your way up through the water column until you find the level at which the fish are feeding.

While trout in warm climates are often deep during the summer, in the late fall, winter, and spring, the trout do venture into the shallows during the day to find food. These are the best seasons to pursue trout in these stillwaters because the fish are in their comfort zone, feeding happily at depths that are best suited for a fly rod and floating line. Here are some of the best places to look for trout in stillwaters:

Inflow. If it is hot outside, fish gather near inflows because feeder streams often bring cooler, or at least more oxygenated, water into a lake. Even when there is no temperature advantage to the inflow, the current sweeps food into the lake.

//content.osgnetworks.tv/flyfisherman/content/photos/Stillwater-Trout-from-Inflows.jpg
An inflow from a river or stream is one of the best places to look for trout in a lake. The inflow may have a more hospitable temperature, more food, more oxygen, or trout may be about to enter the tributary prior to spawning. In this photo you see Jurassic Lake Lodge, Argentina, near where the largest tributary runs into the lake. Photo: Julian Escalada

Use stream tactics such as a nymph and indicator rig to drift your flies from the stream into the lake. Pay particular attention to the area where the stream shallows drop off into the depths of the lake, as fish tend to cruise there in search of easy meals.

Outflow. An outflow doesn’t bring food into a lake, but it’s a shallower area with a gradually increasing current where the lake falls away into a stream. Trout take advantage of the current: They sit in the moving water and watch for food items like midges, mayflies, and terrestrials drifting toward them.

An advantage for fly fishers is that the area where the current quickens is by nature shallower than the rest of the lake and offers more opportunity for sight fishing.
Approach these areas slowly and with a low profile, watching carefully for feeding trout. As with an inflow, don’t cast directly to a stationary trout, or you may spook it. Use the current or wind drift to bring your fly to the fish.

Shore and shallows. In big, deep lakes in warm climates, trout are often deep and difficult to reach. In small alpine lakes, the deepest part of the lake is a winter refuge only. When the trout feed, they seek out the shoreline and shallow flats where the sun penetrates to the bottom and stimulates the food chain.

//content.osgnetworks.tv/flyfisherman/content/photos/Stillwater-Trout-on-Shorelines.jpg
The shoreline and nearby shallows are where sunlight can penetrate to the bottom and stimulate the food chain. The shore is also a constant source of terrestrial insects like ants, beetles, and grasshoppers. Photo: Ross Purnell

The shore is also a constant food source for trout where ants, beetles, and other terrestrial insects fall or blow into the lake from nearby vegetation, or where insects like damselflies migrate from the lake depths to the shoreline to hatch.

The best strategy is to approach the shore cautiously wearing polarized glasses and a baseball cap to block glare. In lakes with good trout populations, you’ll see trout cruising the shallows.

Try to predict the path of the moving trout and cast your fly well in front so you do not alarm it. Allow the trout to spot your fly and then race toward it. It’s one of the most exciting ways to hunt stillwater trout.

If wind is causing waves on the water, seek out the leeward end of the lake (the end the wind and waves are blowing toward). Wind and waves often accumulate surface foods along the shore on one end, and the fish recognize these situations. You may have to cast against the wind if you’re fishing from shore, but the fish will be close, less spooky because of the wave action, and preoccupied with feeding.

Submerged logs. Trout in shallow water often maintain and patrol a well-defined territory, and these areas are often near or around a downed tree, boulder garden, rocky outcropping, shelf, or other type of structure. If the water is clear and shallow, study these areas closely from a high vantage point before you cast.

One reason trout prefer these areas is because they offer security from predators. Logs, rocks, and underwater shelves provide places to hide and may obstruct your view of the bottom, so sight fishing may not be possible. Use shallow-swimming flies such as Callibaetis nymphs, damselfly nymphs, and Woolly Buggers, and swim them slowly above and around the structure to entice a predatory strike.

Overhanging trees. Overhanging limbs provide shade, protection from airborne predators, and are a constant source of terrestrial insects such as caterpillars, inchworms, ants, and beetles. Keep your casts low to the water so you can get under the overhanging limbs and present your fly as if it fell from the tree. Sometimes an audible “plop” acts as a dinner bell for less wary wilderness trout. At other times, you must land your fly softly.

After the fly lands, allow your terrestrial imitation to sit motionless for an extended period. Then try twitching the fly subtly, as if the insect was twitching its legs, attempting to crawl across the surface meniscus, or take flight. Sometimes the slightest movement can be an incentive to strike.

Springs. Cold springs welling up from the bottom or entering the lake as tributary streams are critical feeding areas. Use a thermometer or look for clear sandy or rocky areas on an otherwise weedy lake bottom to find these areas.

Stream channels. In shallow lakes or reservoirs, look for submerged former stream channels or possible pathways between heavily weeded areas. Trout use these underwater highways to move from one feeding area to the next. Sometimes the channels are the feeding areas, since the rest of the lake is too choked with weeds for the fish to feed comfortably.

//content.osgnetworks.tv/flyfisherman/content/photos/Stillwater-Trout-Locations.jpg
Dave Hall Illustration

On Henry’s Lake, Idaho, for example “The Ditch” extending from Staley Springs is one of the best fishing locations—especially in late summer when water temperatures are high and weed growth is at its heaviest. The spring brings cooler water into the lake, and large trout prowl up and down The Ditch looking for food.

Weed beds. Aquatic vegetation is the base of the food chain that grows trout foods. Weed beds are full of damselflies, scuds, daphnia, Callibaetis nymphs, leeches, and snails, so concentrate on imitating these food items.

If the weed bed reaches the lake surface, fish around and near it. Position your boat or inflatable so you can cast parallel to the weed bed, and retrieve your fly along the weeds for as long as possible.

Often the weeds do not quite reach the surface, creating a shallow-water fishing situation where trout cruise just above the weeds, picking off both surface foods and food hiding in or ascending from the weed bed. Use a floating or clear, intermediate sinking line and retrieve your fly slowly, just above the weeds.

Float Tube Tactics

In a boat, pontoon, or float tube, you can cover much more water than wading the shoreline on foot. This is a big advantage, especially on featureless lakes in the spring, when the weeds have not grown up, and terrestrial insects are not yet important.

One of the easiest ways to get started fishing stillwaters is to slowly troll a Woolly Bugger or Zonker from a float tube or inflatable pontoon boat. You don’t even need to cast—just move your tube over water 5 to 10 feet deep, start slowly kicking your fins, and pull line from your reel, allowing the fly to trail behind you by about 50 to 60 feet.

Each time you kick your fins, the fly pulses and swims forward, and then it hesitates and drops while your legs scissor for the next kick. Keep your rod tip low while you troll so you can effectively raise it to set the hook.

Chironomids. The most important aquatic insects on many stillwaters are midges, members of the Chironomidae family. Midge ­larvae live in the mud at the bottom of both stillwaters and streams. In lakes, they are incredibly abundant, and the individual insects are much larger than the midges normally found in streams and rivers. Stream midges are regularly imitated with #16-28 hooks, while midge pupae in lakes fall into the #8-16 size range. (See “What Trout Eat” on page 44 for complete information on the midge life cycle.)

Trout root on the bottom for midge larvae, and they also eat adult midges on the surface, but the most important and dependable phase for fly fishers is when midge pupae, leave their burrows on the bottom and travel to the surface to hatch. Trout cruise near the bottom looking for these midge pupae and in some cases they chase chironomid pupae as they ascend toward the surface.

Since pupae travel upward from bottom to top, it’s important that your imitation does the same. To mimic this behavior, use a strike indicator and a monofilament leader up to 20 feet long, depending on the depth of the lake.

Your leader length—the distance between your fly and the indicator—should be only slightly shorter than the depth of the water so you can suspend your fly just above the ­bottom. Attach one or two split-shot 12 to 18 inches above the fly and allow the fly and weight to sink and then hang vertically below the indicator.

The indicator acts as a float that suspends your fly just above the bottom, or at varying depth levels depending on where you find feeding fish. Test the bottom with midge larva imitations, and work your way up through the water column with various ascending pupa imitations until you find what works. With a little patience, you will find the best combination of depth and pattern, and the trout will reward your efforts. If your fly snags the bottom, shorten the leader. Lengthen the leader if you suspect the fly is not close enough to the bottom. When you slowly retrieve the fly and indicator rig, the fly moves horizontally near the bottom, imitating a highly vulnerable life stage and keeping the fly in the most likely strike zone.

//content.osgnetworks.tv/flyfisherman/content/photos/Locating-Stillwater-Trout-1.jpg
Ross Purnell photo

Midges begin hatching just days after ice-out and continue hatching on many lakes—depending on elevation—until late July. The most intense hatches occur in the spring when water temperatures near the bottom reach between 50 and 55 degrees F. This occurs early in the season in shallow water warmed by the sun, and in late spring or early summer in water 20 feet deep or more. Knowing the bottom contours and depth of your favorite lake helps you predict where and when the most concentrated midge hatches might occur.

Midges are most often black, olive, maroon, red, dark brown, or even pure chrome, and their bodies are heavily segmented. Midge pupae also have cheeks and gills, both easily imitated with a white or colored beadhead and tuft of white Antron or CDC near the hook eye.

At certain times and locations, most midges are predominantly one color. Sometimes trout key on more than just size and shape and show a preference for a specific color.

Use an aquarium net to take midge samples from just under the surface, and match your imitation to the most prevalent size and color. You don’t need many different types of patterns. The Black Beauty or the Jujubee Midge cover most situations, but you’ll need them in sizes 10 through 16 and in several different colors.

Ross Purnell is the editor and publisher of Fly Fisherman.

GET THE NEWSLETTER Join the List and Never Miss a Thing.

Recommended Articles

See More Recommendations

Popular Videos

Bull Trout Bastion

Bull Trout Bastion

Hilary Hutcheson fishing for bull trout in the Elk River of B.C.

Rio Technical Trout

Rio Technical Trout

Rio Technical Trout

Costa Ferg Sunglasses

Costa Ferg Sunglasses

Costa's Todd Barker reveals the features of the new Costa Ferg sunglasses, a best-of-category winner at ICAST 2020.

Huk Waypoint Collection

Huk Waypoint Collection

Huk's new Waypoint Collection fishing apparel is conservation-minded by using recycled water bottles.

See More Popular Videos

Trending Articles

The top eight spots for lakes, ponds, and reservoirs.Locating Stillwater Trout Beginners

Locating Stillwater Trout

Ross Purnell

The top eight spots for lakes, ponds, and reservoirs.

You can be a successful freshwater fly fisher with just the nine knots shown here.9 Best Fly Fishing Knots You Should Know Beginners

9 Best Fly Fishing Knots You Should Know

Fly Fisherman Staff | Illustrations by Joe Mahler

You can be a successful freshwater fly fisher with just the nine knots shown here.

Here are seven important strategies from some of the world's best nymph fishermen.7 Tips for Rigging Your Nymphs like a Pro Beginners

7 Tips for Rigging Your Nymphs like a Pro

George Daniel - March 11, 2019

Here are seven important strategies from some of the world's best nymph fishermen.

See More Trending Articles

More Beginners

Without effective and functional casting, much of the rest of the curriculum doesn't really matter.Simple Casting Stroke Fixes Beginners

Simple Casting Stroke Fixes

John Juracek text & photos - September 15, 2020

Without effective and functional casting, much of the rest of the curriculum doesn't really...

The right tackle can't cure a bad fisherman, but it is one sign of a good fisherman who has done the homework.The Finesse Game: The Best Tools for Close and Personal Presentations Beginners

The Finesse Game: The Best Tools for Close and Personal Presentations

Ross Purnell | Photography by Barry Beck - February 25, 2020

The right tackle can't cure a bad fisherman, but it is one sign of a good fisherman who has...

Here are some of the best places to look for trout in stillwaters.Top 8 Spots to Find Stillwater Trout Beginners

Top 8 Spots to Find Stillwater Trout

Ross Purnell - August 31, 2020

Here are some of the best places to look for trout in stillwaters.

How to deliver meat & potatoes to hungry troutTools for Streamer Fishing Beginners

Tools for Streamer Fishing

George Daniel - February 10, 2020

How to deliver meat & potatoes to hungry trout

See More Beginners

Magazine Cover

GET THE MAGAZINE Subscribe & Save

Digital Now Included!

SUBSCRIBE NOW

Give a Gift   |   Subscriber Services

PREVIEW THIS MONTH'S ISSUE Arrow

GET THE NEWSLETTER Join the List and Never Miss a Thing.

Phone Icon

Get Digital Access.

All Fly Fisherman subscribers now have digital access to their magazine content. This means you have the option to read your magazine on most popular phones and tablets.

To get started, click the link below to visit mymagnow.com and learn how to access your digital magazine.

Get Digital Access

Not a Subscriber?
Subscribe Now