Collapse bottom bar
West Coast

Tip of the Day: Casting Bigger Flies

by John Larison   |  September 15th, 2011 3



This past winter, I called my buddy Nate Koenigknecht, guide and rod junkie at C.F. Burkheimer, and asked him for some line advice.  I told him I wanted to turn over a 12 inch leech with my 8134 (13’4” 8 wt), and asked if he thought the rod could handle a 700 grain line.  After he finished laughing, he gave me some keen advice.  His words have resulted in a simplification of my tackle bag—a rare occurrence for a Spey fiend.


Instead of upping the grain of the head, Nate suggested I up the grain of the tip.  In his words, the head (in this case a 570 compact Skagit) is plenty heavy to turn over a big fly, even an absurdly large snake-fly.  But the tip (in this case a ten foot section of T-14) doesn’t have the mass to unstick that large fly from the river.  In the fight between fly and tip, the fly wins.


So, Nate suggested I build up a tip made of Rio’s T-17 material, eight feet or so would be sufficient.  He also suggested, I smooth out my casting stroke: less punch on the forward stroke and a more sustained loading as I came through the D-loop.

Turning over big junk on a small line

I was skeptical.  But he was right.  My next trip to the river, my 8134 turned over every ridiculous concoction I tried, the 12 inch leech and then some.


As a result, my tackle bag has been simplified.  Instead of switching up in head size when I want to throw a heavier or ‘stickier’ fly—a cumbersome move when midstream—I now switch up in tip mass.  On my 6 and 7 weights, I go from T-11 to T-14, and on my 8 and 9 weights, I go from T-14 to T-17.




Load Comments ( )

Related posts:

  1. Bigger Flies Beefier Lines
  2. Spey Casting: Making sense of all these lines!
  3. Sink Flies Faster for Winter Steelheads
  4. The Fly Box: Tips for tying undulating steelhead flies
  5. Dry Flies: Skating to Welcome Autumn
back to top